Open-Silicon to Participate in Panel Discussion About Custom SoC Solutions for IoT at ARM TechCon

Open-Silicon to Participate in Panel Discussion About Custom SoC Solutions for IoT at ARM TechCon

By Unknown   06:19   No comments:

MILPITAS, CA--(Marketwired - October 24, 2016) - Open-Silicon, a system-optimized ASIC solution provider and ARM Approved Design Partner, today announced it will participate in a panel discussion titled, "Creating Custom SoCs for IoT: Easier Than You Might Think," at ARM TechCon 2016 in Santa Clara, CA. The company will also demonstrate its ARM® Cortex®-M Based IoT Custom SoC Platform.

Panel Session:

• Title: "Creating Custom SoCs for IoT: Easier Than You Might Think"
• Panelists:
• Nandan Nayampally, VP of Marketing and Strategy, ARM
• Swamy Irrinki, Senior Director of Marketing, Open-Silicon
• Jeff Miller, Product Marketing Manager, Mentor Graphics
• Paul Martin, Director of Engineering, Sondrel
• When: Thursday, October 27, 11:00am -- 11:30am
• Track/Location: Expo Theater (Free), Exhibition Floor, Santa Clara Convention Center

Abstract: The hardware industry finds itself in a new wave of innovation driven by custom SoC development for mixed signal IoT devices. These devices span an incredibly diverse market space, from medical to white goods and everything in between. Despite the diversity, they share common characteristics where analog circuits connect the real world to processors and fuel the drive to innovate, reduce cost and differentiate. In this panel session, experts from ARM, Mentor Graphics, Open-Silicon and Sondrel will discuss why it is now easier than ever to design custom SoCs. The panel will look at the paths to low-cost silicon and try to debunk the belief that devices must be created on the latest nodes to be competitive. The panel will look at the tools that can help companies create mixed-signal devices, including devices incorporating MEMS sensors. The panel will explore how companies without experienced resources available can get to market.

Booth Demonstration:

• Booth #935 - Exhibition Floor, Santa Clara Convention Center

Wednesday, October 26, and Thursday, October 27, from 10:30am - 6:30pm

ARM Cortex-MBased IoT Custom SoC Platform - Demonstrates end-to-end communication between sensor hubs and a cloud platform through a gateway device. Depending on the type of radio technology, the sensor hubs can be used outdoors, on the factory floor or inside a room. This industrial IoT system setup is part of Open-Silicon's Spec2Chip IoT Platform, which allows IoT ASIC designs to be evaluated at the system level.

About Open-Silicon
Open-Silicon transforms ideas into system-optimized ASIC solutions within the time-to-market parameters desired by customers. The company enhances the value of customers' products by innovating at every stage of design -- architecture, logic, physical, system, software and IP -- and then continues to partner to deliver fully tested silicon and platforms. Open-Silicon applies an open business model that enables the company to uniquely choose best-in-industry IP, design methodologies, tools, software, packaging, manufacturing and test capabilities. The company has partnered with over 150 companies ranging from large semiconductor and systems manufacturers to high-profile start-ups, and has successfully completed over 300 designs and shipped over 120 million ASICs to date. Privately held, Open-Silicon employs over 250 people in Silicon Valley and around the world. www.open-silicon.com

Open-Silicon is a trademark and service mark of Open-Silicon, Inc. registered in the United States and other jurisdictions. All other trademarks are the property of their respective holders.

Contact Information:

Purvi Shenoy
Open-Silicon
408-240-5772
Email contact

Media Contact:
Jennifer DeAnda
208-794-7113
Email contact

Read More

China’s growing robotics industry suffers from lack of operators, integration

China’s growing robotics industry suffers from lack of operators, integration

By Unknown   06:18   No comments:

At the World Robot Conference 2016, which ran from Friday to Tuesday in a southern suburb of Beijing, some companies complained that the event is unlikely to help them due to the overheated market. Manufacturers looking to automate have had a hard time finding workers to operate their robots, and the industry is still struggling with how to better integrate operation systems. The frenzy in China's robotics market is cooling, and people are raising more practical questions about how to best implement robotics in manufacturing.

 Beijing-based Yaskawa Shougang Robot Co showcases its industrial robots at the World Robot Conference 2016 in Beijing. Photo: Chen Qingqing/GT

On a chilly Friday afternoon, dozens of attendees at the World Robot Conference 2016 in suburban Beijing gathered around an industrial robotic arm demonstrating its delicate grip and wide range of motion.

The six-axis robotic arm can be used in a wide range of applications such as assembly, dispensing, materials handling and packaging.

"I am not surprised by the progress these exhibitors have made in automation. I know many Chinese factories are equipped with industrial robots to increase efficiency," an attendee surnamed Zhang told the Global Times on Friday at the conference, which ended on Tuesday.

China has been considered a growth market for industrial robots over the last few years, Vitaly Nedelskiy, president of the Russian Association of Robotics, said at the conference on Friday.

China's supply of industrial robots grew by a robust 17 percent in 2015, Nedelskiy noted. Companies installed 68,000 robots last year, though the ratio of robots to workers remains far below the global average.

Globally, the average ratio of robots to workers, known in the industry as robot density, stood at 69 installed robots for every 10,000 employees in 2015, according to the International Federation of Robotics (IFR).

By comparison, China's average robot density is about 49 robots per 10,000 workers, Nedelskiy noted.

Under its "Made in China 2025" or China's "Industry 4.0," the Chinese government has set a target for China to have 150 robots per 10,000 workers by 2020.

To achieve the goal, the country's industrial enterprises would have to add 600,000 to 650,000 industrial robots by the end of the decade, according to the IFR.

Because the government is encouraging Chinese manufacturers to install more automated machinery and robots to boost efficiency, about 3,400 companies around the country are now engaged in the robotics business, domestic industry news site robot.ofweek.com reported in May.

However, the development of China's robotics industry has been uneven and the market has grown overheated, leaving major challenges that need to be addressed, industry experts said during the conference.

Men and machines

Despite the rapid growth of China's robotics industry, which had about 20 percent of the domestic market share in 2015, the country lacks workers trained to run the machines, said Qu Daokui, president of Shenyang SIASUN Robot & Automation Co. The lack of workers is one of the major issues many Chinese factories are facing today.

With the government so clearly behind the robotics industry, factories have jumped to acquire automated machinery. The city of Dongguan, South China's Guangdong Province, often referred to as "the world's factory," has adopted a strategy called "Robotics-powered Smart Manufacturing" to improve the productivity of local manufacturers.

There are nearly 200 robot manufacturers in Dongguan, according to a document the local government sent to the Global Times in February. So far, 400 factories have been equipped with a total of 10,000 robots.

Although they have the robots, they still need people to operate them, said Qu, whose company acquired a German vocational training institution in February.

"More and more factories are asking us to teach them how to use [industrial robots], instead of just installing them, which illustrates how important it is to educate more skillful workers," Qu told the Global Times.

The lack of trained workers has weighed on some small and medium-sized enterprises (SMEs) in the Pearl River Delta, said an employee in charge of automation at an original equipment manufacturer in Dongguan, who spoke on the condition of anonymity. Dongguan is an industrial powerhouse in the Pearl River Delta region.

The situation also jeopardizes the government's goal of automating more of the city's manufacturing industry.

"It's hard to find sufficient skillful workers who can handle those machines, and some factories only use automated machines when local officials visit their production lines, and they go back to labor-intensive production after [the officials] leave," the employee told the Global Times on Sunday.

The factories benefit from the government subsidies they receive for rebranding themselves as an "automated business," but few local SMEs actually benefit from installing industrial robots, the employee said.

As it turns out, operating a robot is a multidisciplinary task involving the integration of software, hardware and core technologies, experts said.

A lot of people just think "I'll buy a robot and place it and connect it", but they end up with a lot of problems, said Oussama Khatib, director of robotics laboratory at Stanford University.

Technology and the future

For those who focus on research and development (R&D) in the robotics sector, more effort needs to be made to make the machine smarter by introducing more advanced technologies, but China has a long way to go, industry representatives said.

The rise of China's robotics industry has encouraged a growing number of companies to enter the field, but many of them don't bother with developing their own core technology and stick to manufacturing low-end products, said Gan Zhongxue, chief technology officer of the ENN Group.

"Some elements like the RV reducer and controller are still produced by foreign companies," he told the Global Times on Friday. An RV reducer, one of reduction gears, is used for transmission and the controller is used for controlling the machine.

Purchasing those components from overseas raises the manufacturing costs for Chinese robotics companies.

As far as technological trends are concerned, companies will be concentrating on the collaboration between humans and machines, simplified applications and light-weight robots, the IFR said in its World Robotics Report 2016.

And the demand for industrial robots will likewise be driven by a whole assortment of factors, such as the handling of new materials, energy efficiency, and better developed automation concepts, the report said.

For now, a large part of industrial robots are operating under digital control systems, but a more harmonized human-robot interaction requires greater flexibility and autonomous operation in unstructured environments, which is unlikely to be achieved for the moment, said Zuo Shiquan, head of the equipment industry institute at the CCID Institute affiliated with the Ministry of Industry and Information Technology.

"Although the application of robots in China has expanded in recent years, the next step ought to be to improve R&D, which will help keep us from falling behind our foreign competitors," he told the Global Times.

 By Chen Qingqing Source:Global Times Published: 2016/10/24 19:38:39

  

Read More